Covering Coat Hanger
Coat hanger – Your closet can consist of clothes, coats and accessories, but clothes hangers are also an important part of your closet. Because clothes hang out basically only in plastic, metal and wood, you can dress them with decorative covers that can be made in different colors, patterns and patterns.
Load a sheet of paper, paper or cloth, wrong side up, on a work table or flat surface. Use a marker pen, track areas outside your coat hanger on the paper. Add a 1/2 inch replacement to each side and a 1-inch contribution to the bottom. Cut two pieces with the pattern lines you are tracking in Step 1 as a guide. Repeat for the second magazine. Pin the sides of both pieces with straight legs. Make sure the decorative sides are outward. Sew off your hand leave 1/2 inch or 1/4 inch free at the bottom of the seam. Leave a 1/2 inch gap in the top of paper or fabric so that the hook on the stand can pass through.
Pull the hose through the opening and mount it firmly inside the sewing cap. The bottom is still open at this point, so pull the hanging up through the bottom and curve the hook on the stand slightly so that it can pass through the 1/2 inch opening. Sew a long line along the bottom of paper or fabric. Fold over 1/2 inch or 1/4 inch contribution left at the bottom of two pieces in step 3. Sew a coat hanger all the way to creating a smooth bottom edge.